EPF
Awatar użytkownika
By pol
#1552800
Problem przy otwieraniu plików z firmware Reuleaux DNA200, EFusion DNA200
gdy otrzymujemy komunikat
Unsupported File Format


1. Sprawdzić w EScribe numer wersji programu.
Aktualnie na stronie http://evolvapor.com/dna200.php jest plik instalacyjny z programem EScribe Version: 1.0.32

2. Proponuję pobrać nowszą wersję *** 2015-10-21 EScribe 1.0.35.2 *** (51MB standalone installer)
Pobierz

Teraz wczytanie plików firmware nie powinno sprawić problemu.

Źródło:
Lost Vape EFusion DNA200 Box Mod


DNA200 Screen Theme Generator








Wire wizard building from the ground up

====================

dodo21x przetłumaczył na polski plik opisowy programu EScribe.
Chwała mu za to :beer:
jacekgothic zajął się stroną techniczną tego przedsięwzięcia

Spolszczenie jest w fazie BETA, są w nim drobne błędy. Pracują nad ich wyeliminowaniu.


Instrukcja, jak wrzucić spolszczenie, oraz ono samo znajduje się w "plikowni" DNA200 Trawnik Crew w folderze "!Do segregacji!"
https://drive.google.com/folderview?id=0B22DHYuR30QFLWZ4VU1aQ1RBZ0E&usp=drive_web&tid=0BwNeviYsFE0GSV8yeUJhTTVkbEU

Więcej tutaj >> topic100849.html
Awatar użytkownika
By pol
#1553689
Plik z polską wersją należy zapisać w nowo utworzonym katalogu /pl

Przykładowo w WinXP:
C:\Documents and Settings\user\Dane aplikacji\Evolv\EScribe\Languages\pl








Po uruchomienie EScribe:
1. Jeśli nie mamy od razu wersji spolszczonej, to klikamy > Help, następnie > About EScribe
2. Otworzy się Wam nowe okno. Należy w nim szybko klikać lewym przyciskiem myszy na logo EVOLV do momentu aż zniknie.
3. W zakładce > Tools pojawią się nowe opcje, należy najechać kursorem na pole > Test Translation a następnie kliknąć w > pl
4. Po kliknięciu w "pl" program sam się zrestartuje z wczytanym spolszczeniem.


Używacie na własną odpowiedzialność!
Ostatnio zmieniony 04 sty 2016, 17:14 przez pol, łącznie zmieniany 1 raz.
Awatar użytkownika
By jacekgothic
#1553917
Dodam tylko, że dla poszczególnych OS ścieżka domyślnej lokalizacji plików EScribe może się trochę różnić.
Jeśli ktoś ma problem z ich lokalizacją, proszę kliknąć prawym przyciskiem myszy w skrót programu znajdujący się na pulpicie a następnie kliknąć lewym na "Otwórz lokalizację pliku".
Awatar użytkownika
By pol
#1587817
Link - Wersja testowa EScribe 1.0.39

*** 2016-02-12 EScribe 1.0.39 ***

This version features:
(1) a new Materials tab where you can store and transfer material settings onto and from the DNA,
[We've included our Ni200, and Steam Engine's SS316 and Ti1. These will be upgraded in the future, if better data becomes available, and others added if others become common.]
(2) the ability to change a profile's material without EScribe, by holding down all three buttons while locked,
(3) Profile Name and Material Name can be displayed on-screen as custom fields,
(4) profiles now have a "Temperature Dominant" option, making temperature the main adjustment for a profile if you want to do so,
(5) for small batteries, in the Mod tab, you can reduce max continuous and pulse battery input currents,
(6) in Help->Language, you can override the language detection,
(7) Device Monitor has "Simulate Button Presses" for remote testing,
(8) Device Monitor can run Python scripts for scientific study and automation,
(9) the ability to adjust the temperature increment, and
(10) various OS compatibility and miscellaneous improvements.


Spolszczenie dla wersji EScribe 1.0.39 >> post1588048.html#p1588048



W wersji EScribe 1.0.39 dla poprawy estetyki należy dopisać w pliku
.....\Evolv\EScribe\Languages\en\Escribe.po

Kod: Zaznacz całymsgctxt "English Language Code"
msgid   "pl"
msgstr  "Polish"




Edit:
Więcej w plikowni trawnika.
Polskie wersje ekranów...
LINK
Awatar użytkownika
By pol
#1589652
Link - Wersja testowa EScribe 1.0.39 - SetupES_2016-02-12.exe

*** 2016-02-12 EScribe 1.0.39 ***

This version features:
(1) a new Materials tab where you can store and transfer material settings onto and from the DNA,
[We've included our Ni200, and Steam Engine's SS316 and Ti1. These will be upgraded in the future, if better data becomes available, and others added if others become common.]
(2) the ability to change a profile's material without EScribe, by holding down all three buttons while locked,
(3) Profile Name and Material Name can be displayed on-screen as custom fields,
(4) profiles now have a "Temperature Dominant" option, making temperature the main adjustment for a profile if you want to do so,
(5) for small batteries, in the Mod tab, you can reduce max continuous and pulse battery input currents,
(6) in Help->Language, you can override the language detection,
(7) Device Monitor has "Simulate Button Presses" for remote testing,
(8) Device Monitor can run Python scripts for scientific study and automation,
(9) the ability to adjust the temperature increment, and
(10) various OS compatibility and miscellaneous improvements.


Spolszczenie dla wersji EScribe 1.0.39 >> post1588048.html#p1588048



W wersji EScribe 1.0.39 dla poprawy estetyki należy dopisać w pliku
.....\Evolv\EScribe\Languages\en\Escribe.po

Kod: Zaznacz całymsgctxt "English Language Code"
msgid   "pl"
msgstr  "Polish"




Edit:
Więcej w plikowni trawnika.
Polskie wersje ekranów...
LINK
Awatar użytkownika
By pol
#1597423
[TESTING]
*** 2016-02-23 EScribe 1.0.41 ***
EScribe 1.0.41 (52MB standalone installer)

This version includes all of the changes of 2016-02-12 and also features:
(1) a friendlier Screen tab,
(2) support for "Hold To Change Material", "Hold To Change Power", and "Temp Locked Hold Up Down" screens,
(3) the speed of power adjustment no longer increases drastically when switching from 0.1W to 1.0W adjustments,
(4) detection of a DNA 200 in recovery mode - now it will suggest a firmware update instead of not showing up until you hit Update Firmware, and
(5) minor bug fixes and improvements to usability.


W nim najnowszy 2016-02-23.sw-update
Awatar użytkownika
By pol
#1601877
[TESTING]

*** 2016-02-29 EScribe 1.0.42 ***

SetupES_2016-02-29.exe (52MB standalone installer)

This version includes all of the changes of 2016-02-12 and 2016-02-23 and also:
(1) adds contributed translation for German. Thanks German DNA Crew!
(2) fixes .ecig file compatibility and locale issues some European users may have experienced. Restore Defaults should also be more reliable.



Jest już polskie tłumaczenie do tej wersji:
PL_EScribe 1.0.42 v3.zip



EScribe.po (en) /for EScribe 1.0.42/
Include German and Polish in the English file.

Nie trzeba już dodawać w angielskim pliku zapisu dla polskiego tłumaczenia.
W wersji EScribe 1.0.42 nie ma jeszcze dołączonego polskiego tłumaczenia.
Awatar użytkownika
By pol
#1698076
[EARLY]

*** 2016-08-05 EScribe 1.2 *** - ze strony Evolv

SetupES250_2016-08-05.exe

This version improves a lot of the basics of EScribe. Here is a list of improvements, by no means complete:
- Most windows are no longer modal.
- In Options, User Interface allows you to choose a desired complexity.
- This version is more modular. Device Monitor, Calculator, Production Utility, and Serial Terminal are now all optional install and can run separately.
- Other changes.

Device Monitor has been improved as well:
- You do not have to start EScribe to launch Device Monitor. It can be launched independently from the Start menu.
- You can run multiple copies of Device Monitor, and uploading/downloading settings will pause it.
- You can scroll back in time.

This version can communicate with DNA 60, 75, 200, and 250.



Jest już polskie tłumaczenie do wersji EScribe 1.2:

PL_EScribe 1.2 v1.zip
Awatar użytkownika
By jacekgothic
#1698381
Ładnie schowali zakładkę 'Mod' wraz z analizami... :lol:
Awatar użytkownika
By pol
#1702404
[EARLY]
*** 2016-08-08 EScribe 1.2 SP3 ***


SetupES250.exe (57MB standardalone installer)

This version improves a lot of the basics of EScribe. Here is a list of improvements, by no means complete:
- Most windows are no longer modal.
- In Options, User Interface allows you to choose a desired complexity.
- This version is more modular. Device Monitor, Calculator, Production Utility, and Serial Terminal are now all optional install and can run separately.
- Other changes.

Device Monitor has been improved as well:
- You do not have to start EScribe to launch Device Monitor. It can be launched independently from the Start menu.
- You can run multiple copies of Device Monitor, and uploading/downloading settings will pause it.
- You can scroll back in time.

This version can communicate with DNA 60, 60 Small Screen, 75, 200, and 250.



Spolszczenie:
PL_EScribe_1_2_SP3_v1.zip
Ostatnio zmieniony 16 sie 2016, 13:49 przez pol, łącznie zmieniany 1 raz.
Awatar użytkownika
By dywersant
#1702415
Po roku zmienili układ okienek w swoim oprogramowaniu. Lista nowych funkcji wbija w fotel. A podobno dna miało być przyszłościowe...

Wysłane z mojego LG-D855 przy użyciu Tapatalka
By lxr
#1710595
Po próbie pobrania spolszczenia dostaję komunikat : "Sorry! You don't have permission to perform this action. Please check your email for instructions on how to begin using your account. You can resend the email if you didn't receive it."
Co zrobić ?
Awatar użytkownika
By sikor370
#1710610
Bo ten link @pol'a widze, ze prowadzi do forum evolv i Ci pisze, ze nie ma uprawnien i masz sie zalogowac... Pobierz spolszczenia z Trawnik Crew cos tam cos tam...zobacz czy podejdzie
https://drive.google.com/drive/folders/ ... 1o5UUw4a2c

Albo @pol popraw linka :P
By kajtek01
#1710632
Mam pytanie :czy w tej polskiej wersji są profile aku, chodzi mi o vtc5?

Wysłane z mojego D5503 przy użyciu Tapatalka
Awatar użytkownika
By sikor370
#1710650
Tlumaczenie ma sie nijak do profili akusow. Pliki profili sciagasz i otwierasz w escribe w celu wyslania do moda.
Awatar użytkownika
By SzamanDM
#1718323
Gdzie znajdę profil do LG HG2 3000mAh 20A?
Awatar użytkownika
By SzamanDM
#1718352
A to napewno ten? Ja mam z rachunku ze sklepu napisane 20A.
Awatar użytkownika
By jacekgothic
#1718358
Nie przypominam sobie, żeby były jakieś inne LG HG2. Pewnie ktoś się walną z opisem.
Albo podał maksymalny prąd rozładowania
"This time model HG2 20 A continuous - capacity 3000 mAh,Maximum discharge current: 30A"

-- [scalono] 19 wrz 2016, 21:18 --

Czemu sobie sam nie zrobisz analizy? To raptem około 30 minut a masz profil dokłanie pod swoją sztukę.
Awatar użytkownika
By SzamanDM
#1718366
A jak to zrobić? Piszą by jakiś rezystor podłączyć. Od paru godzin mam DNA200.
Awatar użytkownika
By SzamanDM
#1718390
Czyli nawinąć dużo grubego drutu. Włączyć i czekać?
@Thaniell zdjęcia brakuje w tym linku.
Awatar użytkownika
By SzamanDM
#1723609
Jak do jasnej ciasnej zmienić jednostkę temperatury w analizatorze atomizera? Ciągle wyświetlają mi się tam Farenheity.

I jak chcę zrobić tę "analizę pakietu" to ona mi się na końcu sama zapisze? Nie mam do wyboru Li-Ion. Co mam wybrać?
Przy "analizie układu" również pyta się o temperaturę pokojową w stopniach F.

Denerwuje mnie ta zabawa. :/
Awatar użytkownika
By pol
#1724038
[EARLY]

*** EScribe 1.2 SP4 ***

https://downloads.evolvapor.com/SetupES_1_2_SP4_ServicePack.exe (11MB service pack)

This service pack is mostly bug fixes.

On the EScribe side:
- This resolves some scaling issues in Large Fonts mode / on high-DPI screens.
- Get Information shows which tests were actually performed by the manufacturer in Production Utility.
- Get Information's Manufacturer link did not work in 1.2 SP3. This has been fixed.
- When you had more than one DNA device connected, the auto-connect did not automatically select the new one in the Connect dialog. This has been fixed.
- Minor compatibility and bug fixes.

On the device side:
- Fixed a bug on the DNA 250 that could cause its charging to be slow with certain USB cables (in my tests, the problem cables were flat).

Other:
- For DNA 250, Production Utility now requires charge tests to be at least 900 mA. This may require a powered USB hub.



Dodałem korektę spolszczenie

PL_EScribe_1_2_SP3_v2.zip
Awatar użytkownika
By pol
#1739100
[RECOMMENDED]

*** EScribe 1.2 SP5a ***


https://downloads.evolvapor.com/SetupES_1_2_SP5a_ServicePack.exe (11MB service pack)


This service pack is mostly bug fixes.

On the device side:
- DNA 200 and DNA 250 no longer lose the battery meter on startup sometimes.
- Calibration values have been improved slightly for newer DNA 200s and DNA 250s. (More accurate USB Voltage, mainly.)
- Temperature Protected and other messages now show the correct number of flashes again.
- Some VaporShark DNA 200s would reset charging when above 0.8A with 1.2 SP3 and 1.2 SP4. They now charge at full speed.

On the EScribe side:
- Device Monitor no longer shows Battery Cell 3 on 2-cell devices (except in debug mode).
- Get Information shows test information in an easier-to-read form.
- Production Utility's Battery Test is now more thorough. It also shows a progress bar.
- Production Utility's Fire Test completes more quickly now. It also shows a progress bar.
- This resolves some more scaling issues in Large Fonts mode and some crash bugs.
- Minor bug and compatibility fixes.

[SP5a fixes a few minor EScribe bugs in SP5.]
By PawelM
#1739141
Dzięki! Oczywiście wcześniej EScribe sam z siebie mi się nie uaktualnił - mimo włączonej opcji automatycznego instalowania aktualizacji.
Awatar użytkownika
By sikor370
#1739142
SP5a a ja na SP3 jeszcze jade... trzeba sie ogarnac..
@pol spolszczenie...
Awatar użytkownika
By pol
#1754684
Po uruchomieniu EScribe pojawia się komunikat:

A Service Pack for EScribe is availabl. Download?


Version 1.2 Service Pack 5.2:

EScribe:
- Fixed EEPROM Read Errors on some DNA 200s and 250s.
- Help->Report Bug and Send Feedback now forward to the Help Desk.
- TLS 1.2 is now used for secure connections if available.
- Minor bug fixes.
Production Utility:
- The thermistor is now checked. You will need to be in a room above 0F to use Production Utility.
- Minor bug fixes.


Tej wersji nie znalazłem na oficjalnej stronie http://evolvapor.forumchitchat.com
Awatar użytkownika
By Timi
#1832928
Czy ktoś coś wie o wersji ES w wersji nowszej od 1.2 SP 5.2?
Awatar użytkownika
By pol
#1833271
Spolszczenie dla EScribe v. SP 5.2 pasuje do wersji EScribe Suite 2.0 SP5.2
https://forum.evolvapor.com/topic/66731 ... ibe-suite/
For international customers: https://downloads.evolvapor.com/SetupES ... cePack.exe

Plik ze spolszczeniem wrzucić do katalogu
C:\Documents and Settings\użytkownik\Dane aplikacji\Evolv\EScribe\Translations
zmienić nazwę pliku na pl.po i ponownym uruchomieniu jest polska wersja.


==============
Nowa testowa wersja tłumaczenia EScribe 1.2 SP5.2 (do folderu \Evolv\EScribe\Languages\pl)
EScribe_1_2_SP5_2_pl_v_1.zip

Nowa testowa wersja tłumaczenia EScribe Suite 2.0 SP5.2 (do folderu \Evolv\EScribe\Translations)
EScribe_Suite_2_0_SP5_2_pl_v_1.zip
Ostatnio zmieniony 31 sty 2018, 08:09 przez pol, łącznie zmieniany 3 razy.
Awatar użytkownika
By pol
#1833274
James na forum EScribe poprosił o korektę/wyjaśnienie tłumaczenia
msgid "&Connect..."
msgstr "&Połącz przez USB..."

msgid "If you connect a temperature-sensing coil..."
msgstr "Konfiguracja trybu kontroli temperatury - TC // Wstępne rozgrzanie - Preheat //"

msgid "Temperature Coefficient of Resistance (Approximation)..."
msgstr "Współczynnik temperaturowy rezystancji TFR (przybliżony)"

Connect doesn't necessarily imply USB. We may have other means of connecting to devices in the future.

I'm not sure what is meant in the middle one, but I notice preheat.. What is the connection?

The last of these generates a material curve from a TCR.

Thanks!

James


Jakieś propozycje?
Awatar użytkownika
By Timi
#1833280
@pol THX :beer:
Smoant Levin PK-mały,wielki pod

https://i.ibb.co/k3tQNQN/vape-poland[…]

Zastanawiałeś się kiedyś, ile może kosztować najd[…]

UWAGA! Na blogu Starego Chemika BARDZO WAŻNE informacje! Dotyczą zdrowia i życia.